How to Paint Bathroom

How to Paint Bathroom How to Paint Bathroom Painting the rooms in a house has always been a tedious and tough task. However with a bit of a planning and preparedness by you in advance can actually make the task simple and not so difficult. Of all the rooms in a house, the bathroom is the most challenging and difficult to paint because of its several nooks and crannies. So let us know about the way in which one can paint the bathroom of your house without having to undertake much bother. The things which are essential for the purpose of painting a bathroom perfectly are as follows:

One large and one small paint brush
Painters tape
Paper towels
Roller
Paint
Painters tray
Scrubby clothing

The method of painting a bathroom is made easier and simpler with the step by step guide given below:

You will have to begin by using the painters tape all over the places in the bathroom where you do not wish to paint. Also remember to tape the ceiling of the bathroom with the painters tape. Make sure that the tape is well stuck to the wall and the ceiling so that the paint doesn’t bleed through.
The next step involves the shaking of the paint in the paint bucket. Also remember to stir the paint properly with a stirrer so that the paint gets mixed well. Now use the painter’s tray to pour out some of the paint from the bucket onto it. Take the brush to be used for painting and dip it in the tray of paint until the total brush gets submerged in the paint. However be careful that the paint doesn’t get past the bristles of the paint brush.
The first step in painting the bathroom would be to outline the room. Since this is the most challenging task while painting any room, you will have to use a small paint brush in order to get close to the ceiling, shower, toilet, sink and all other areas that need outlining. Be very careful not to touch any of these surfaces with your paint brush. Incase the paint does get in touch with any of these surfaces; wipe it off with a damp cloth while the paint is still wet. After having done with the outlining of various surfaces, you can move on to paint the remaining surfaces with a roller. Roller helps in spreading out the paint evenly onto the surfaces and it also covers quickly.
You will have to dip the roller into the paint nicely until it is submerged properly. After doing so, use the roller to paint the surfaces properly.
After finishing the painting, leave the paint to dry off. After the paint dries off, pull out the tape.