How to Paint a Door

How to Paint a Door How to Paint a Door Painting a door not only makes it more durable but also enhances the appearance of the room as a whole. Though it might look as a simple task to accomplish but painting a door requires some basic instructions and steps to follow strictly. Only then it is possible to properly paint a door which is also an integral part of a room or a house. Proper preparations should be made based on a plan for completing the task successfully. This is because doors of a house tend to show scratches, imperfections, brush marks and other blemishes even after the job is done.

There are some definite aspects to observe while painting a door. These points are described in brief under the following subheads: -

Prerequisites

To prepare the project of painting a door, an individual should have some basic observations. He should avoid starting the painting process of the door in any unfavorable climatic conditions. A damp weather or a rainy day should never be picked for starting such projects. This is because the extra moisture in the air in such adverse weather conditions will stagnant the process of drying the coat of paint applied on the door. Besides, the surface of the door should be thoroughly cleaned from any dirt. You can use a wet clean cloth to wipe the surface. But make sure you allow the surface to be dried out completely before applying the first coat of paint. Remove the dirt and grease if present on the surface of the door to obtain a smooth plane before painting. This is because it is always easier to paint a new door than painting the old ones. The grease which accumulates on older doors makes it difficult to sand them. It is always recommended to use oil paints rather than water-based paints. This is because the risk of warping or cracking is high in water-based paints than in oil paints. Before the process of painting actually starts, an individual should fill the cracks and holes of a door with putty. A masking tape should be used for doors having glass panels to avoid any breakage of the same.

Painting Process

An individual should apply primer before he starts painting the door using an oil paint. This is because the primer helps in bonding the paint to the door more easily. Tools that are generally used for painting include rollers and brushes. Satin paints and glossy finishes offer a nice look to the door of a house. An individual can paint a door either without displacing the hinges or by removing them before painting. If the door is to be painted in its place, it is recommended to paint the various parts adjoining to the handle at last. This will facilitate the closing and opening of the door easily. An individual should start painting the door from the middle and continue towards its edges. He should try to apply the paint evenly on all parts of the door. It is advisable to go for a relatively thin coat of paint than a heavy one in the beginning of the process. Instead he can apply several coats to provide a better finishing look. One should also observe the grain alignment of the wood while painting a door. This is because the paint usually sticks evenly on the surface of the door, if the strokes are made, in the direction of the aligned grain. It is also necessary to understand the importance of painting a door without leaving any brush marks. This can be done by applying the paint evenly on the door which would appear smooth in the end of the process.

These are the essentials factors that hold good while painting a door properly. An individual should observe the above mentioned information before paining a door of his room or a house.