How to Make a Skateboard Ramp

You must have noticed youngsters doing hazardous tricks including somersaults in the air with their skates on a skateboard ramp. Whenever you pass by an unused car lot or a skate park, you will see several people gathered around witnessing the grand spectacle of skaters practicing on the skateboard ramp. But the most annoying thing is that most skaters find it difficult to locate skate parks near their locality. They have to travel long distances to practice. This makes it necessary to make a skateboard ramp at home in order to practice easily and more often. So let us learn how to make a skateboard ramp easily at home.

Ramps can be divided into many types including a quarter pipe, a half-pipe, a small kicker or a mini ramp. After deciding which ramp to build, you can get started by arranging for the stuff that you require for building the ramp.
The wood you need for your ramp can be of two types. The first one is good enough for the ramp which will be kept outside in the open. This ramp needs to be built with ply which has been pressure treated so that it can handle the pressure. It will also weather the change in climatic conditions.
The second type is the one which you will keep carrying outdoors and indoors. This needs to be lightweight for you to be able to do this. The wood should not be treated making it more lightweight.
After that, you need to decide on the length, width and height of the ramp. Depending on the amount of tricks you want to perform in the air, you will need to be elevated to a good height from the ground. This can be done by a ramp of good height. The width is usually about 8 feet.
Take the plywood and draw the curve of your skate ramp on it with a pencil. Mark these measurements on your ramp plans and use two sheets of plywood to incorporate those plans.
Next you have to cut along the lines you made to get the perfect wood panels for your ramp.
Place the plywood panels in the shape of the skate ramp along with the 2-by-4s. Make sure that you use all the 2-by-4 wood pieces on the side panels. You can use a hammer and some nails to do the task. Evenly distribute the 2-by-4 pieces to make the skate ramp sturdy and strong.
Take half inch thick plywood and tie it up to the frame of the skate ramp. Make sure that the plywood is not more than half inch thick because if it is thicker, it will not allow the bending of wood to attach to the frame without cracking. Again you can secure the plywood with the help of nails and screws.
Use sandpaper of 100-grit to polish the surface of the ramp and make it smooth. After the plywood is completely smooth, wipe the dirt away with a piece of cloth. Now your skateboard ramp is ready for use.

So the next time you want to practice, do so on your own ramp at home. Teach your friends how to make a skateboard ramp and make the most of your pastime.