How to Make a Beer Pong Table

Beer pong is one of the popular drinking games which are mostly preferred by college boys. Although beer pong can be played on any kind of a table but having the actual table with the exact size can add tons to the excitement of the game. So let’s start off by gathering the things that are required for performing this process. How to Make a Beer Pong Table How to Make a Beer Pong Table

Lacquer
Spray paint
L brackets
Screws
2 sawhorses
2 by 6’s
2 by 4’s
4 by 8 plywood piece
Wood stain
Masking tape
Stencils

Let us now have a look at the process:

Take a well ventilated area such as a garage or a warehouse and clear it. Use the wood stainer to stain the plywood sheet. In the same time also stain the 2 by 4’s for the leg support of the table.
Choose a covered area and place the board on the ground. Make the bottom of the board face up. Now place a 2 by 4 in about 6 inches distance from the corners. Screw the board in place and make sure that all sides are screwed properly. Now repeat this process with all the 4 corners. Now build a skirt under the table by using the 2 by 6 boards. Remember to screw in the L brackets into the 2 by 6’s.
Now is the turn of designing the table with your spray paints. Use your favorite color in the main background and the coloring of the rest of your area depends upon your choice of detailing.
Take stencils to draw and create designs on the table. After the designs have dried, apply a lacquer finish to the table for preventing any damage caused by beer.
Your beer pong table is ready!