How to Install Molding

How to Install Molding How to Install Molding Installing new moldings in either windows or kitchen cabinets can change the total look of your interiors of your house. Moldings sure add a lot of elegance and class to your otherwise dull and drab interiors. In this article we shall know more about the procedure of installing moldings to kitchen cabinets. However you have to take care of one particular aspect while installing the molding. Make sure that you have the best mitre box with you to assist you with your mitre cuts. Accurate mitre cuts ensure an impressive molding to a large extent. Before we begin, let us first gather the things that are needed for this purpose. They are as given below:

Mitre saw
Molding
Small hammer
Small finish nails
Glue
Small nail set
Paint brush
Paint/stain
Sandpaper

The step by step guide given below can make your task of installing molding to your kitchen cabinets very easy and simple:

First and foremost you will have to decide on the style of your molding. You need to keep in mind that moldings of different sizes and styles can lend an entirely different look to your old kitchen. You will also have to decide on the placement of the moldings i.e. if you want the moldings to be installed where the cabinets meet the ceiling/floor. You can also choose to have moldings along the edges of the doors.
You shall have to measure carefully so that you are well aware of the quantity of moldings that is going to be needed. It is recommended that you measure twice so that you get an accurate measurement. Keep in mind that moldings are usually sold by the foot; therefore be sure that you have the exact foot measurements of the amount of moldings that you are going to purchase.
You shall have to start with a corner. Start by measuring the first piece of molding by taking care to visualize those angles where the next piece of molding will ram against the first piece. Keep in mind that the calculation of angles is tricky and the formation of several angles will make up a compound angle. You shall have to take your time and visualize about each particular cut. This is a tricky aspect while installing moldings therefore one needs to exercise caution while doing so.
The next step is to paint or stain the molding before you mount it. Leave it to dry off properly.
Use glue or tack to hold the molding in place. Incase you are using wider molding then you can tack them by using small finish nails. In order to avoid damage to the molding you can tack with a small hammer or a tack gun.